Lots of little things post   ordered and received a breakout board for the uno so wiring will be easier. I’ll need to practise my crimping of servo connectors. The final dome height is right and now I need to make some brackets for the eyestalk as the height of the eye pivot in the slot is no longer right for the disc in the dome.    I have made my servo motor mounts for the dome/eye movement and have some 3mm threaded rod to make up the linkage.    After one warm day in the shed the PLA gears teeth started to droop so I’m reprinting all bits in PETG, ASA or ABS depending on which printer I have access to.    lots of things that need other things to be determined before other things can be determined. Ugh. It will get there. 

Cheers Justin.  Nice to know there are a few of us on the Dalek path in NZ.  

Hi @John   THanks for the feedback! I'm still not 100% satisfied with it, but I uploaded the file under my NSD Slat Pack as Version 1.1 here:   Incidentially if you could fix the typo I made in the changelog I'd appreciate it 😅  

That's looking great.   Could you please upload the files to the Downloads area, here? They will be easier for people to find if they are located where all the other files live.   If you need to update the existing slat pack with the amended file, you should be able to do that. Any problems, let me know. Thank you.