All hemispheres attached.  Second coat of paint.  I sanded the fibreglass on the top and bottom and did a general neaten up.  Next - cut out and attached inner collars to the top and bottom of the skirt so I can attach the base/shoulders.  First though, cut base from plywood and start to look at how I attach it to the mobility chair.  A job for next week though....

The base is coming along. Couldn't help snapping a quick photo.

Lots of little things post   ordered and received a breakout board for the uno so wiring will be easier. I’ll need to practise my crimping of servo connectors. The final dome height is right and now I need to make some brackets for the eyestalk as the height of the eye pivot in the slot is no longer right for the disc in the dome.    I have made my servo motor mounts for the dome/eye movement and have some 3mm threaded rod to make up the linkage.    After one warm day in the shed the PLA gears teeth started to droop so I’m reprinting all bits in PETG, ASA or ABS depending on which printer I have access to.    lots of things that need other things to be determined before other things can be determined. Ugh. It will get there. 

Cheers Justin.  Nice to know there are a few of us on the Dalek path in NZ.