Thank you for adding it in.   I don't see a typo. Maybe not looking hard enough.

Ok I think that’s better. Now to figure out the linkage for the eye servo. 

Today while the printer is winnowing away at making a new ring gear I made these new eye pivot mounts. I thought it would be better than 3D printing and I had this aluminnimummum left over.    This puts the eye stalk in the centre of the slot if the dome but it can’t come forward enough so I cut the front edge off the mount. I think now the bolt is hitting the underside of the dome so I’m going to drill another eye pivot hole 10mm lower down. 

We have had two weeks straight of rain, high temperatures and humidity. Welcome to the wet season   I have done some more sanding, added on a couple of layers of spray putty and bog to the shoulders.   Hopefully soon I can start work on the hemis and paint, although the automotive acrylic paint I use does not like the high humidity, especially darker colours.