Cheers, and no worries. Glad to share. The next instalment is the armrest data files. Build pics of the actually the actual parts I printed and assembled for my console are earlier in this thread, but here are all the detailed parts and drawings needed for the armrest that pops on top of the console:-

@John No problem!   RE the typo, I actually submitted a new version a few hours later, so that problem solved itself. Thank you though!

Order of work today; I drilled up the dome rings in preparation for the pivot supports Drilled sundry holes that would have been present on Shawcraft domes (just for the sake of authenticity) Marked up and drilled the dome light holes (again, Shawcraft spec, will drill for the proper Maypole lights later on) Drilled A-frame holes using a 10mm forstner bit Roughed-in the eye slots using my oscilating tool (to be finalised once I get the pivot supports fitted).   I used fibral paste to fit the dome rings, before fibreglassing on the top side as usual. I used a slightly broken USB reading light to help illuminate the inside of the domes, it was quite helpful!   The eagle-eyed among you will have noticed that there are three domes on the go. The one on the floor is a spare that I'm planning to use on a fun project I have pencilled in for next year, but I thought I'd get a few things done now... stay tuned!

I'll have a look at this, thanks @DevCake3d👍